cedar

I had a little time over the weekend to start working on the shingles for the back wall. It’s the type of project that I visualize as being very quick and easy, but of course, it’s not. On every row I was reminded of every non-plumb surface on our house and had to deal with the almost-but-not-quite-right angles of cedar shingles. It should look great once it’s all painted, although it’s taking me a bit of time to get used having siding back there, having shingles instead of lap and having the corner trim, which is a new detail we had to add to be able to cleanly mate up the disparate siding materials.

Normally I like shingle courses spaced a little tighter, but having them larger is not only saving us a ton of $$, but it also sort of mirrors the unusually large exposure of our lap siding on the rest of the house. Lastly, the 11″ spacing was the only way I could work out to keep each electrical box within a single course. I didn’t want to have to put in the big pieces of wood that often surround lights and switches on newer houses. In the same spirit as removing all the conduit and sinking everything into the wall, I’m trying to make it all look less cluttered.

Looking like a real house now...

After my recent learning experience on how to properly space cedar roofing shingles, I had gradually been reworking the roof.  Yesterday Chloe went to play at the neighbors’, so I had a big block of time to keep pounding away.

Installing these is tedious, but they really are beautiful.  I got everything done up to the ridgeline, so all I need to do is install some flashing on top to complete the job.

Another project 5 years in the making.  We have been sans a step down to the patio ever since we replaced the 60′s solid door with a glass one and removed the subsequently obsolete back step.  The patio door isn’t very high…maybe about 10″ above the patio, but it has started becoming a problem for Zoe, one of our dogs.  She and Porter are both 11, and there just isn’t as much spring in their step as there used to be.

The rest of the family was out of town, so Chloe and I spent some time Saturday making a new step.  We made it a full 6′ wide for aesthetic reasons, although 1/2 of it serves no purpose, as it’s in front of the non-opening portion of the door.  We used some left-over 4×6 pieces that were cut from the playhouse beams, as well as another piece of cedar recycled from our neighbor’s deck.  The construction was deceptively complex, as our patio has a slight slope down to the left, so each 4×6 had to be cut at an angle and to the appropriate height to make the steps level.  Needless to say, I botched a couple and had to do some “fine tuning.”  The top of the step is standard 2×6 cedar decking (new), and the trim piece that wraps around underneath the steps is actually made of cedar fence stock.

That trim piece is something that I am particularly proud of.  When Chloe and I were shopping for the piece, I initially picked out a beautiful piece of 1×6 cedar.  I was a little reluctant about the nearly $11 price tag, since it was yet one more wound in the constant bleeding of our wallets.  In the next aisle, I noticed some 1/2″x6x6 pieces of rough cedar fencing.  While most were the typical broken, knotty pieces, some didn’t look too bad.  After going through about 50 pieces, I managed to find two that were nearly knot-free.  As they were only $1.75/each, I decided to get a couple and take a chance.  Well, to my surprise, they sanded down beautifully, and they look like knot-free, Grade A cedar.  Not bad for $3.50 (and the 15 minutes it took to find the only two pieces that had this potential.)

Step construction, confused Zoe

A wary Porter tests the new step

Completed step. Someone should really fill in that hole in the concrete.

Rough v. Sanded